Relearning usage of tire pressure monitoring sensor

Tire pressure monitoring relearn usage: when the tire pressure display is inconsistent with the actual tire pressure data, tire pressure can be relearned.

Relearning method for fetal pressure monitoring (steps):

1. In the ignition state of the vehicle, turn the left side of the steering wheel and select and enter the tire pressure indicator.

2. Press the SET/CRL button on the left lever (about 2 to 3 seconds).

3, at this time, the driving computer prompts the tire pressure monitoring to relearn, and the choice is (to enter the tire pressure monitoring and re learning mode), otherwise it will not learn.

4, at this time, the horn whistles two times, suggesting that the tire pressure monitoring is being carried out to relearn. (the driving computer also shows: in the study of fetal pressure)

5, A, the left turning auxiliary lamp of the vehicle is long, and the left rear view mirror turning light is long, which indicates that the left front tire pressure is being restarted. At this point, increase (aeration) or reduce (deflate) left front tire pressure, about 5 seconds (or + 8KPa). Complete the re learning process for monitoring the left front tire pressure of the vehicle. The horn whistles to prompt the right tire pressure learning mode.

B, the right steering auxiliary lamp of the vehicle is long and the steering wheel of the right rear view mirror is long and bright, indicating that the right front tire pressure is being relearned. At this point, increase (aeration) or reduce (deflate) right front tire pressure, about 5 seconds (or + 8KPa). Complete the re learning process of the pressure monitoring on the front right tire of the vehicle, and the horn whistles to indicate the right tire pressure learning mode.

C, the right turn light on the rear of the vehicle is long and bright, indicating that the right rear tire pressure is being monitored and restudied. At this point, increase (aeration) or reduce (deflation) right rear tire pressure, about 5 seconds (or + 8KPa). Complete the re learning process of pressure monitoring for the rear right tire of the vehicle. The horn flare is used to prompt the entry tire pressure learning mode.

D, the left turn light of the vehicle is long and bright, indicating that the left rear tire pressure is being monitored and restudied. At this point, increase (aeration) or reduce (deflate) left rear tire pressure, about 5 seconds (or + 8KPa). Complete the re learning process for monitoring the left rear tire pressure.

6, the horn whistles two times, and the turn signal lights for about 3 seconds, indicating that four tire pressure monitoring is re learning.

Tire pressure monitoring sensor reset usage: when the wheel hub position changes (such as the front and rear wheel change, the front wheel intermodulation, the rear wheel intermodulation), the new hub (new hub tire pressure monitoring sensor needs to match the driving computer) the tire pressure monitoring sensor reset method (step):

Open the tire pressure monitoring sensor to reset the lock button and unlocking button of the remote key (for a few seconds) until the vehicle is in the state of the power failure, until the vehicle horn sends two whistles. Reset process of tire pressure monitoring sensor

A, the left front turn light is long, and the left front tire pressure monitoring sensor is reset. At this time, the left front wheel is deflated (about 5 seconds) and the horn is whistled for two times. (it needs to be completed in 1 minutes)

B, right front steering lights are long and bright, enter right front tire pressure monitoring sensor reset. At this time, the right front wheel is deflated (about 5 seconds) and the horn is whistled for two times. (it needs to be completed in 1 minutes)

C and right rear steering lights are long and bright. Enter the right rear tire pressure monitoring sensor reset. At this time, the right rear wheel is deflated (about 5 seconds) and the horn is whistled for two times. (it needs to be completed in 1 minutes)

D, the left rear turn light is long, and the left rear tire pressure monitoring sensor is reset. At this time, the left rear wheel is deflated (about 5 seconds) and the horn is whistled for two times. (it needs to be completed in 1 minutes)

In order to reset the tire pressure monitoring and tire pressure monitoring sensors, the operation sequence of the wheels is: left front, right front, right rear, left rear.